2Press the Print button on the TV panel or remote control. You see the Print Settings screen:

3To print one copy of the photo, press Enter.

To print multiple copies, press Prev. < or Next > until the number in the Copies box is correct. Then press Enter.

After a moment, printing starts.

During printing, the Printer light flashes. When printing is finished, the Printer light turns off.

4To print additional photos, repeat these steps. You can send multiple photos for printing at one time, up to 15 photos.

To monitor your print job or to cancel it, see the next section.

If you see a printing error message, select Yes to check for the problem. Then follow the on-screen instructions to solve the problem and continue printing. For additional help, see page 119.

When you’re finished printing, remove the borders from the edges of your photo by bending them back and forth and tearing them off.

Print

Caution

Remove your printed photos before 10 of them have ejected from the printer so they don’t block additional photos from ejecting properly or cause a paper jam.

Don’t open the lock cover on the front of the printer while it is printing; this causes printing to stop.

Viewing, Printing, and Saving Photos 93