Manuals / Brands / Computer Equipment / Personal Computer / Epson / Computer Equipment / Personal Computer

Epson LT - 286e Disk Change Line Test, Floppy Disk Error Messages, Sequential R/W Test, line inoperational

1 60

Download 60 pages, 352.89 Kb

Sequential R/W Test

This test checks the sequential seek, read, and write capabilities of a floppy disk drive. It performs a sequential read/write operation on the diskette in the specified drive.

To perform this test, insert a diskette into the drive you plan to test. Use a diskette you have formatted with the Diskette Format test.

This test destroys all data on the diskette.

Disk Change Line Test

This test checks the status of the disk change line. This line should change when you insert or remove a diskette from a floppy disk drive.

To perform this test, insert a diskette into the drive you plan to test. Use a diskette you have formatted with the Diskette Format test.

Floppy Disk Error Messages

DIAG displays two types of error messages while testing the floppy disk drive: messages DIAG generates and those the controller generates.

DIAG may display the following error messages during the Disk Change Line test:

W a r n i n g - Change line inoperational

DIAG displays this message if the line is not working properly. This may indicate a problem exists with the floppy drive or the controller.

System Diagnostics 33

Contents

Page IMPORTANT NOTICE DISCLAIMER OF WARRANTY COPYRIGHT NOTICE TRADEMARKS Contents The DIAG Main Menu Screen Selecting Continuous Passbound Page Page Introduction Starting the Diagnostics Program Creating a Database Page The DIAG Main Menu Screen Key Selecting Diagnostics Tests Test System Board Floppy Setting the Run Time Parameters Page Timebound Testing Continuous Testing Passbound Testing Error Logging Log errors to serial port (COM1) error 10 System Diagnostics Floppy disk A not present Floppy disk B not present Hard disk C not present Printer port not present Serial port not present Executing Diagnostics Tests in Batch Mode Running the Tests System Board Diagnostics Basic Functionality Test CPU Protected Mode Test Processor Speed Test Coprocessor Test the math coprocessor is not DMA Controller Test Interrupt Controller Test Timer Test RTC Test CMOS Validity Test Memory Diagnostics BIOS ROM Test Parity Test Pattern Test Testing from absolute base xxxxxxxxh Performing Pattern test in memory Walking 1’s Test Walking 0’s Test Address Test Refresh Test Hard Disk Diagnostics complete Hard Disk Parameters Disk drive type Interleave factor Bad track list Mark Bad Tracks (Y/N) Add an entry Revise an entry Delete an entry Clear Bad Track list Hard Disk Format Auto Interleave Media Analysis Performance Test Seek Test Read/Verify Test Check Test Cylinder Force Bad Tracks Hard Disk Error Messages INSUFFICIENT MEMORY FOR DATA TRANSFER Minimum memory required is - 128KB Floppy Disk Diagnostics Diskette Format Drive Speed Test Random R/W Test Sequential R/W Test Disk Change Line Test Floppy Disk Error Messages Keyboard Diagnostics Controller Test Scan/ASCII Code Test Keyboard Clock Line Test Keyboard Data Line Test Video Diagnostics Adapter Test Attribute Test 80x25 Display Test 40x25 Display Test 320x200 Graphics Test 640x200 Graphics Test Page Selection Test Color Test Miscellaneous Diagnostics Printer Adapter Test Communication Adapter Test Page Keyboard Scan/ASCII Codes 42 System Diagnostics Page 44 System Diagnostics Page 46 System Diagnostics Page 48 System Diagnostics Page 50 System Diagnostics Page Code Page 54 System Diagnostics System Diagnostics