EPSON
Not required under suitable use as setting the cartridge on the printer.
8.2.2.Environmental exposure control Not established
8.3.Engineering Controls Proper ventilation
9.Physical and Chemical Properties of Ink Formulation
9.1.General information
Appearance: | Yellow Liquid |
Odor: | Slightly |
9.2. Important health, safety and environmental information | |
pH: | Not applicable |
Boiling point: | No data available |
Melting point: | No data available |
Flash point: | about 71°C (Closed cup) |
Autoflammability: | None |
Explosive properties: | 1.4~6.9v/v% as |
Oxidizing properties: | None |
Vapor density: | Greater than 1 (air = 1) |
Relative density: | No data available |
Solubility in water: | Soluble |
Solubility in fat: | No data available |
Partition coefficient: | No data available |
Viscosity: | No data available |
9.3. Other information | Not specified |
10. Stability and Reactivity |
|
Stability | Stable under normal temperature |
Hazardous polymerization | No data available |
10.1. Conditions to avoid: | High and freezing temperatures |
10.2. Materials to avoid: | Oxidizers and explosives |
10.3.Hazardous decomposition products: No data available
11.Toxicology and Health Hazards
*Based on toxicology data of chemically similar material
Routes Of Overexposure: Eye, skin, inhalation, and oral
Acute Health Hazards:
•Overexposure of eye surface to ink may be mildly irritating
•Overexposure of skin to ink contact may cause irritation and in some people swelling and redness
•Intentional inhalation overexposure to ink vapors may result in respiratory tract irritation and anesthesia
•Intentional or accidental oral ingestion may cause an upset stomach
Chronic Health Hazards: | None known |
Mugtagenicity: | Not meet the criteria for classification according to EU Directive 1999/45/EC |
Carcinogenicity: | Not contain any substances listed in IARC Monographs (1,2A and 2B) |
MSDS T6244 | Version 6.0 |
Page 3 of 4 | Release Date December 14, 2007 |