Select your country:

1Pressorto select Country/Region, then press OK.

2Pressorto select your Region, then press OK.

3If you change the region, confirm your selection at next screen by pressing the 1 key (for yes) on the numeric keypad.

Enter the date and time:

1Pressorto select Daylight Saving Time, then press OK.

2Pressorto select Summer, if your region uses Daylight Saving Time and it’s currently in effect. (DST is effective from spring to summer.) Otherwise select Winter to turn off the setting.

3Press OK.

4Pressorto select Date/Time, then press OK.

5Pressorto select the type of date display, then press OK.

6Use the numeric keypad to change the date, then press OK.

7Pressorto select a 12-hour or 24-hour display, then press OK.

8Use the numeric keypad to set the time.

9If you selected 12h, Pressorto select AM or PM.

10Press OK.

When you’re finished choosing your settings, press Menu to exit.

4 Install ink cartridges

Note: Don’t load paper before installing the ink cartridges. 1 Open the scanner.

2 Open the cartridge cover.

3 Shake the ink cartridges, then unpack them.

4 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals from the cartridges.