Epson
Copying Files From Your Computer to the Viewer
You can copy photos, videos, and music from your computer to the viewer. For instructions on copying music, see page 10.
WMV files are automatically converted to MP4 when they are transferred, and videos that exceed 2GB are automatically divided into multiple files.
1.Connect the viewer to your computer as described on page 10.
2.
Epson Link2 icon on your desktop to open the program.
3.Select Photos, Videos, or Music, depending on the type of files you want to transfer.
4.Select the files to transfer in the Computer window, then
click the 
down arrow in the center of the screen. The files are transferred to the viewer.
Note: You can also transfer files by dragging and dropping them into the lower contents window. For more information, click the
? in the upper right corner of the Link2 screen.
5.When you are finished transferring files between your computer and the viewer, make sure you disconnect the viewer as described on page 11.
Using the Viewer With USB Devices
You can connect a flash memory drive or other USB device to your viewer and copy files to or from the device.
The viewer supports devices that are compatible with the USB Mass Storage specification, including:
❏Digital cameras
❏Flash memory drives
❏Memory card readers
❏External hard drives
❏Epson multimedia storage viewers
Note: USB hubs are not supported, and some USB devices may not work without a power connection. Epson cannot guarantee the compatibility of any device.
Connecting a USB Device
Before you connect a USB device, connect the AC adapter to the viewer and plug it in if possible. If your USB device has an AC adapter, use it to prevent the possible loss of files during transfer.
1.Open the connector cover on the side of the viewer.
2.Plug the device into the Host USB connector on the side of the viewer.
If the device has a USB cable, connect one end of the cable to the device and the other end to the Host USB connector on the viewer.
Note: To prevent a possible malfunction, do not use both USB connectors on the viewer at the same time.
3. Turn on the viewer and the USB device if necessary.
Copying Files to the Viewer
After you connect a USB device, you can copy all the files to the viewer, or select individual files to copy.
1.On the Home screen, use the
USB Device
Backup USB device to Viewer
Browse USB Device
Copy all Backup Files
2.Do one of the following:
❏To copy all files, select Backup USB device to Viewer, then press OK. The files are copied to a folder that is automatically created in the Backup Files folder on the viewer. Skip to step 7.
❏To copy selected files, select Browse USB Device in the USB Device menu, then press OK. You see your files displayed in thumbnail view. Continue with the steps below.
9/06 | Epson |