Taking Pictures 2-3

R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
R
Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
2
Using the display panel
The large number in the lower right
corner of the display panel shows the
approximate number of remaining
pictures that you can take.
This number is affected by the image quality setting.
When you adjust the image quality, the number of
remaining pictures is altered accordingly.
When you take photos, the number of remaining
photos and the total number of photos that you can
save in the memory card are displayed on the LCD
monitor. When you play back photos, the LCD
monitor displays the number of the photo that you are
viewing and the total number of photos that you have
taken.
Note:
❏If there are any audio recordings stored on your
memory card, the number shown on the display panel
may be greater than the actual number of remaining
photos.
❏The number of remaining photos displayed does not
include video clips.
When the memory card is full, the number on the
display panel reads 0 (zero), the red indicator light on
the back of the camera blinks, and the shutter button
does not work. Before you can take any more pictures,
you must erase some or all of the images in the
memory card. See “Erasing images” on page 3-7 for
instructions. If you want to save your photos before
erasing them, transfer them to your computer using
the EPSON Photo!4 or EPSON Auto Downloader
software with the PhotoPC 3100Z connected to your
computer, or insert the memory card into a PC Card
slot of a different device.
When in the Program and Manual
camera modes, the exposure value
appears at the left side of the display
panel and the shutter speed appears
at the right when you depress the
shutter button halfway.
When the camera’s dial switch is set
to , SEt is shown on the display
panel.
While making an audio recording,
rEc is shown on the display panel.
When taking photos using the time
lapse feature, Int is shown on the
display panel.