Taking Pictures 2-11
R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
R
Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
2
When a preview image is being displayed
To use the basic playback feature when the LCD
monitor is displaying a preview image, follow the
steps below.
1. Remove the lens cap, set the dial switch to and
turn on the camera. A preview image is displayed
on the LCD monitor.
2. When the camera is in Manual mode, press the
MENU CHANGE button. When the camera is in
Program mode or Full Auto mode, go on to step3.
Note:
See “Making camera mode settings” on page 4-6 for
information about the camera mode.
3. Press the icon to playback your photos.
During playback, you can enlarge or erase photos,
view multiple photos, and play back audio recordings.
Refer to the appropriate section below.
❏To enlarge photos, see “Magnifying photos” on
page 3-2.
❏To erase photos, see “Erasing images” on page
3-7.
❏To change the number of photos that you can view
on the LCD monitor at a time, see “Displaying
one, four, or nine photos at once” on page 3-1.
❏To play back audio recordings, see “Audio
playback using the built-in speaker” on page 2-21.
To return to the preview image when the camera is in
Manual mode, press the BACK button twice. To return
to the preview image when the camera is in Program
mode or Full Auto mode, press the BACK button once.
Immediately after taking a picture
You can also use the basic playback feature
immediately after taking a picture. You must first
make some settings. Follow these steps.
Note:
Using this feature increases the amount of time that you
must wait after taking a picture before you can take the next
one.
1. Remove the lens cap, set the dial switch to ,
and turn on the camera.
2. Press the Shot SETUP button on the back of the
camera.
3. Press the Confirmation button to select On.