5. Depending on the type of cable you have, line up either
the arrow or the flat surface of the cable connector
with the mark on the camera’s serial port. Then insert
the connector.
6. Turn on the camera and your computer system.
cCaution:
Keep the entire computer sy stem away from potentia l
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless tele phones.
Connecting to a Macintosh
Follow these steps to connect the camera:
1. Make sure the camera and your computer are turned
off. Also make sure the LCD monitor is off .
2. Locate the mo dem port and the p r inter port on the
back of your computer. The ports should be labeled
with icons.
mark
modem port printer port
flat surface
arrow surface
3
R
Poppy Rev.B/TCAT
A5 size Chapter 3
97/09/18 pass 6
Using PhotoPC 600 with Your Computer 38