Note:
EPSON recommends use of EPSON CompactFlash Cards
only. Other memory cards may be incompatible wit h the
EPSON PhotoPC 600.
Also, if your computer is equipped with a Type II
PCMCIA memory card slot, you can access images
stored on memory cards directly from your computer by
using the optional PCMCIA adapter (B867041).
Installing a CompactFlash Card
Follow these steps to install a memory card in the camera:
1. Make sure the camera and the monitor mode switch
are turned off.
2. Insert the card all the way into the memory card slot, as
shown below.
3. Loop the card slot cover string around the hand strap
holder.
4. Align the tabs on the back of the cover with the
installed memory card, as shown below.
5. Press the cover onto the memory card so that the
memory card slot is completely sealed.
Note:
Always attach the card slot cover to your camera when you
use optional CompactFla sh Cards.
arrow mark
2
1
6
R
Poppy Rev.B/TCAT
A5 size Chapter 6
97/09/18 pass 4
Camera Options 81