4.To change a setting, press the or button to select
the option you want to change, then press the SELECT
button. The settings for that option appear on the
screen.
5.Press the or button to select a setting, then press
the SELECT button.
6.Connect the camera to the printer as described on page
93, then turn on the printer and load the size and
type of paper you selected. If a message telling you
how many sheets to load appears at the bottom of the
Album Print options screen, be sure to load at least
that many sheets. For paper loading instructions, see
your printer User’s Guide.
7.When you are ready to start printing, press the or
button to select Print.
8.Press the SELECT button. The camera starts sending the
image data to the printer.
While the camera is sending data, the LCD screen goes
blank and star icons move across the display panel
on the top of the camera. When printing starts, the
display panel returns to normal.
Note:
To cancel printing, hold down the camera’s BACK button
for about three seconds. A message stating that printing is
canceled appears on the LCD screen for five seconds, then
the screen returns to the Direct Print menu. The printer
stops printing and ejects the paper.
9.When printing is finished, the LCD screen returns to
the Direct Print menu.
When you finish printing, close the Direct Print program
by pressing the BACK button. Then slide the monitor
mode switch to OFF and turn off the printer.
Sticker Print mode
Follow these steps to print using the Sticker Print mode:
1.Access the Direct Print program as described on page
95, then press the or button to highlight
Sticker Print. Press the SELECT button. Thumbnail
images of the first nine photos in your camera appear
with the currently selected image framed in blue.
2.Press the or or button until the image you want
to print is framed in blue.
8
R
PoppyRev.B/TCAT
A5 size Chapter 8
97/09/19 pass 2
Using the Direct Print Kit 99