*These names are for U.S. market only. The Worldwide names for these media “Semigloss Photo Paper- Heavy Weight (Roll)” and “Glossy Photo Paper- Heavy Weight (Roll)” respectively.
**The surface of Poster Board – Semigloss is same as Semi Gloss
Note:
For Roll Paper - The left, right, top and bottom margins of the Stylus Pro 7000 is 3mm, (42 dots).
For Cut Sheet – The top, left, and right margin of the Stylus Pro 7000 is 3mm (42 dots). Except, the bottom margins is 14 mm (198 dots).
Cut Sheet – The Minimum User defined paper sizes for the EPSON Stylus Pro 7000 is 7.2” (W) x 7.2” (H) (182mm x 182mm) and the Maximum User defined is 24” (W) x 7.5’(H) (610mmx2300mm)
The maximum printing width is 604mm, 8562 dot. (=24” – 3 mm
The Minimum and Maximum Printing Width for the Roll Paper is 182mm~610mm.
The Maximum Printing Height for the Roll Paper is 25m.
The Minimum and Maximum Printing Width for the Cut Sheet paper is 182mm~610mm.
The Minimum and Maximum Printing Height for the Cut Sheet paper is 182mm~2300mm.
The Default for both the roll paper and the cut sheet for U.S. is letter and for others including the Europe is A4.
The paper types supported with each size depend on the market.
EPSON Imaging Technology Center | Page: 11 |
Revision: 1 (Date: 6/20/00) |
|