6.6Select Dot Size “ESC ( e nL nH m d”
Format: |
|
|
|
|
|
|
|
ASCII | ESC | ( | e | nL | nH | m | d |
Hex | 1B | 28 | 65 | 02 | 00 | m | d |
Decimal | 27 | 40 | 101 | 02 | 00 | m | d |
Range of Definition:
nL = 02H, | nH= 00H |
m = 00H, | d = 00H, 01H, 02H, 03H, 04H |
Function:
-The value of d specifies the Dot Size.
d | Dot Size |
00H: | Default* |
01H: dot size 1 | Micro dot |
02H: dot size 2 | Normal dot (Single) |
03H: dot size 3 | Normal x 2 (Double) |
|
|
*Dot selection Normal (Single or Double) is performed automatically depending upon the chosen resolution.
-Dot control is effective regardless of the printing mode and printing density.
-If the dot size is changed in the middle of the page, the operation is not guaranteed.
-m is the parameter to extend functions, it is fixed with 0.
-If n has a value not specified above, this command is ignored.
Initial State: | Default |
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
The default is specified by the ESC @ command.
The default is specified by the ESC (G command.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
None
EPSON Imaging Technology Center | Page: 28 |
Revision: 1 (Date: 6/20/00) |
|