Printing is too slow.

●It takes a few moments for PictureMate to process your images before printing them.

●If PictureMate is in a hot or sunny location, move it to a cooler place and try printing again.

For faster printing, try these tips:

●Don’t print more than 40 pictures at a time.

●Photos with borders print faster than borderless photos.

●Turn off special features such as color effects and red-eye reduction.

●JPEG photo files print faster than TIFF files.

Software Installation Problems

●Follow the instructions beginning on page 34 to install your software. Don’t connect PictureMate to your computer until you are instructed to.

●Close other programs, including screen savers and virus protection software, and try installing again.

●Make sure your system meets the requirements listed in your on-screen User’s Guide.

●To print over a network, see the on-screen User’s Guide for instructions on setting up printing.

Print Quality Problems

You see banding (light lines) in your prints.

●The print head may need cleaning. See page 60.

●Be sure to print with the glossy or whiter side of the paper face up.

●The Print Pack may need replacing. See page 50.

●The print head may need aligning. See page 62.

Your print is grainy.

The print head may need aligning. See page 62.

Your print is blurry or smeared.

●Use PictureMate photo paper to ensure proper saturation, absorption of ink, and quality.

●Be sure to print with the glossy or whiter side of the paper face up.

●The print head may need cleaning. See page 60.

●The print head may need aligning. See page 62.

65