●Avoid places subject to dust, shock, or vibration.

●Leave enough room around the printer to allow for sufficient ventilation.

●Place the AC adapter near a wall outlet where the plug can be easily unplugged.

●Do not place or store the printer, the AC adapter, or the optional battery outdoors.

●Do not block or cover the vents and openings in the printer.

●Power supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of power-supply cords and do not allow the AC adapter or power-supply cords to be stepped on or run over. Be particularly careful to keep all power-supply cords straight at the ends and the points where they enter and leave the AC adapter.

●Use only the power-supply cord that comes with this product. Use of another cord may result in fire or electrical shock, or injury.

●The AC adapter model A381H is designed for use with the printer with which it was included. Do not attempt to use it with other electronic devices unless specified.

●Use only the type of power source indicated on the AC adapter’s label, and always supply power directly from a standard domestic electrical outlet with the AC power cord that meets the relevant local safety standards.

●Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.

●Avoid using electrical outlets controlled by wall switches or automatic timers.

●Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.

●Do not use a damaged or frayed power cord, or the AC adapter or optional battery if damaged.

●If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

●Never disassemble, modify, or attempt to repair the AC adapter, power cord, printer, and options by yourself except as specifically explained in the printer’s guides.

●Unplug the printer and the AC adapter, remove the optional battery from the printer, and refer servicing to qualified service personnel under the following conditions:

The power cord or plug is damaged; liquid has entered the printer; the printer, the AC adapter, or the optional battery has been dropped or the casing damaged; the printer, the AC adapter, or the optional battery does not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the operating instructions.)

●Do not use with wet hands.

70