Connecting to a PC Laptop Computer

The main cable included in your ELP Link III set connects the PS/2 mouse cable (needed to use the remote control as a mouse) and

9-pin serial cable (needed to use the ELP Link III software and the Effects buttons on the remote control) to the projector.

PS/2 mouse cable

9-pin serial cable

Mouse/Com port

main cable

1.If you connected the PS/2 mouse cable included with the projector as described on page 25, disconnect it from the laptop and the projector.

2.Connect the round end of the main cable to the projector’s Mouse/Com port.

3.Connect the 9-pin end of the PS/2 mouse cable included with the ELP Link III set to the MOUSE terminal on the square end of the main cable.

80

4 • Using the ELP Link III Software