Epson PowerLite 755c, PowerLite 765c Enter, Enter, Macintosh OS X:, EMP NS Connection, EMP NS Connection, 74Presenting Through a Wireless Network, When you’re done making settings, highlight the

then press the pointer button to the right to move to the next character position. When done typing the password, press Enter.

3.When you’re done making settings, highlight the OK button at the top of the screen and press Enter.

note

If you don’t see your network adapter’s IP address, allow a minute for it to appear. If your access point or AirPort base station uses DHCP (Distribute IP addresses setting is enabled for AirPort), sometimes it takes a minute for the server to pick up the IP address.

Once you’ve selected the IP address for your network adapter, you won’t see the Switch network dialog box when you start

NS Connection. If you want to change to a different network adapter, click Extension on the EMP NS Connection dialog box, then click Switch LAN on the extension dialog box.

Projecting Wirelessly

Once you’ve started EasyMP and set up your projector and computer in either Ad Hoc mode or Access Point mode, follow these steps to start NS Connection and project wirelessly.

1.Make sure you’ve installed your 802.11G/B wireless card in your projector (see page 50).

2.Windows: Select EMP NS Connection from the Start menu.

Macintosh OS X: Double-click the EMP NS Connection icon in your Applications folder.

3.The first time you start NS Connection, you may see a dialog box asking you to select your network. Select the IP address for your computer’s network card and click OK.

74Presenting Through a Wireless Network