To connect two monitors to the video interface on your computer, follow the steps below. If you want to connect three monitors to the video interface, you can follow these steps, but first see “Connecting three monitors” on page 15.
1.Make sure your monitors, the computer, and all other peripheral devices are turned off.
2.If one monitor is already connected to your computer, unplug its power cord from the electrical outlet and the AC power inlet. Then disconnect the video interface cable(s) from the monitor and the computer.
3.Connect each of the five T connectors to the first monitor’s five BNC connectors, as shown below. To do this, align the cutouts in the T connector with the tabs on the monitor connector and plug in the T connector. Then push it in while turning it clockwise as far as possible until it fits in place.
tab
Professional Series II Monitor | 11 |