Caution: Always turn the printer off using the P Power button. When you press this button, the P Power light flashes briefly then goes off. Do not unplug the printer or turn off the power to the printer until the P Power light stops flashing. This ensures that the print head is safely capped.

Introduction 13

Keep the printer away from dusty areas.

Keep your entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.

Place the printer near a wall outlet where the plug can be easily unplugged.

Use only the type of power source indicated on the label.

Connect the printer to a properly grounded outlet. Avoid using an outlet on the same circuit as a photocopier or air control system that regularly switches on and off.

Avoid using electrical outlets controlled by wall switches or timers.

Use only the power cord that comes with the printer. Use of another cord may result in fire or electric shock.

The printer’s power cord is designed for use with the printer only. Using it with other equipment may result in fire or electric shock.

Do not use a damaged or frayed power cord.

If you use an extension cord with the printer, make sure the total ampere rating of devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

Do not block or cover the openings in the printer’s case.

Do not put your hand inside the printer during printing.

Do not move the print head by hand unless instructed to do so by an Epson service technician; otherwise you may damage the printer.

Do not insert objects through the slots. Take care not to spill liquid on the printer.

Do not attempt to service the printer yourself.