Chapter 2 Before Setting Up

2-1

Connecting the AC Adapter to the Printer

n
Plugging in AC adapter
CAUTIONS:
*
Before connecting the printer to the power supply, make sure that the
voltage and power specifications match the printer’s requirements.
-
Using an incorrect power supply can cause serious damage to the printer.
Connect the AC adapter according to the following procedure.
➀
Make sure the printer is turned off.
➁
Plug the power cable connector into the printer’s power connector with the ar-
row mark facing upward. (You can remove the power cable by grasping the
connector firmly at the arrow mark and pulling straight out.)
ower Connectorower Connector
Frame
➂
Plug the power cord into the outlet, and turn on the power.
➃
Be sure to ground the printer with the frame ground screw on the board at the
rear side of the unit via a F.G cable.
5