➃ The adjusting screw which holds the roll paper near-end detector, may be
loosened and then set the top of “B” to the adjustment value found in ➂, and
tighten the adjusting screw. (The adjusting screw can be turned with a coin.)
Screw
➄ Be sure that the detecting lever operates smoothly after finishing the adjust-
ment.
NOTES:l Since the adjustment values in Table 3-1 are calculated from standard
measurements, there may be some variations depending on the model.
*
If a roll paper with a red end mark at the paper end is used, this mark may
cause the paper to stick together.If this occurs, the dimension A differs from
the table.
-
Be surethat the detecting lever operates smoothly after finishing the
adjustment.
*
If the roll paper becomes loose due to poor paper quality, the detector may
operate incorrectly.
18