Connecting the Projector to Your Equipment 32
Connecting a Component Video Source
Procedure
AConnect one end of your cable (not included) to either the
projector’s BNC ports or Computer port (depending on the
type of component video cable you’re using). Connect the
other end of the cable to your equipment.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or
Component Video. sp.69
Connecting an S-Video Source
Procedure
AConnect one end of your S-Video cable (not included) to the
projector’s S-Video port, and the other end to the S-Video
connector on your equipment.
BTurn the projector on (sp.34), select the image source
(sp.43), and adjust the image (sp.35).