Epson Z8000WUNL, Z8050WNL The following items can be set.

List of Functions 87
The following items can be set.
Sub Menu Function
WEP encryption You can set the encryption for WEP encoding.
128 Bit: Uses 128 (104) bit encoding
64 Bit: Uses 64 (40) bit encoding
Format You can set the input method for the WEP encrypted key.
ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the
network administrator for the network in which the projector participates, and then set to "ASCII".
HEX: Input in hexadecimal.
Key ID Selects the WEP encryption ID key.
Encryption key
1/Encryption key
2/Encryption key
3/Encryption key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network
administrator for the network in which the projector participates. The type of character and th e number that can be entered differ
according to the WEP encryption and Format settings.
If the number of characters you enter is shorter than the required character le ngth, no character is encrypted. If the number of
characters you enter is longer than the required character length, characters that exceed the permitted number are not encrypted.
128 Bit - ASCII: Single-byte alphanumerics, 13 characters.
64 Bit - ASCII: Single-byte alphanumerics, 5 characters.
128 Bit - HEX: 0 to 9 and A to F, 26 characters
64 Bit - HEX: 0 to 9 and A to F, 10 characters
Authentication Type You can set Authentication Type for WEP encoding.
Open: Method to connect access point with no authentication.
Shared: Authentication Type using WEP key.