FDigital audio output terminals

Digital audio from DVD-Video, DVD-Audio (2ch only), CD and video CD is output from these terminals.

The unit may be connected using either coaxial or optical (TOS) commercially available cables to amplifiers including a decoder, or to digital audio devices such as CD recorders, etc.

COAXIAL: Use RCA (pin) digital audio cable

OPTICAL: Use optical digital audio cable (TOS)

<The optical terminal is covered by a shutter. Make sure that the cable is firmly inserted, but do not force the cable when connecting it or removing it, in order not to cause damage to the unit.

<When using these terminals, set the Digital Output setting to “ON” (see page 31).

<This terminal cannot output the digital audio from a Super Audio CD.

<This terminal cannot output the digital surround audio from a DVD-Audio disc.

<DVD-Audio disc signals are converted where necessary from 192kHz or 176.4kHz to 96kHz/88.2kHz or 48kHz/44.1kHz. However, there may be some occasions when digital audio cannot be output by the unit from such a disc.

G2 channel analog audio output terminals

Connect either the XLR or RCA (pin) terminals to analog audio inputs of a stereo amplifier using commercially available XLR or RCA audio cables.

Make sure to connect:

white plug q white jack (L: left channel)

red plug q red jack (R: right channel)

<When using these terminals, set “Analog Output” to “2 ch” to downmix the multi-channel material to two channels.

Note that if “Analog Output” is set to “Multi ch”, only the front L/R sound of the multi-channel material will be output from these terminals.

H5.1 channel analog audio output terminals

Connect the FRONT, SURROUND, CENTER and SUB WOOFER terminals to a surround amplifier using commercially available RCA audio cables.

<When using these terminals, set “Analog Output” to “Multi ch” to enjoy surround sound.

ENGLISH

11