DVD VCD CD
Display dimming
The display on the main unit can be dimmed to suit the environment in which you listen to music or watch video.
Use the FL DIMMER button to cycle between these settings.
FL Dimmer3:
Full brightness
FL Dimmer2:
Medium brightness
FL Dimmer1:
Minimum brightness
OFF:
The display and indicators are off.
FL DIMauto (FL Dimmer Auto):
The display and indicators are off during playback. They turn on with the minimum brightness in the stop mode.
<Note that the OFF setting is not memorized when the power is turned off. When the unit is switched off with the display off, and then turned on again, the display is reset to the minimum brightness (FL Dimmer1).
<In OFF mode and FL DIMauto mode, when you press a button such as PAUSE, the illuminations turn temporarily on.
DVD
Lip sync
This function allows you to adjust the synchronization of the video and audio portions of a DVD.
Press the LIP SYNC button to display the current lip sync value (default is 0). Use the left and right cursor buttons to adjust the value. Positive values mean that the sound is delayed relative to the picture.
<Press LIP SYNC again to cancel this setting. Any other operational display appearing on screen will also cancel this setting. Note that lip sync should be cancelled if you need to use the left and right cursor buttons to navigate menus, etc.
<The lip sync value you set is stored when you turn the unit off, and will be remembered next time you turn the unit on again.
<This function has an effect on the signals output from the following terminals:
AUDIO OUT, HDMI
<When using the HDMI terminal, set Dolby Digital, DTS and MPEG Audio of “Audio Digital Out” setting to “PCM” (see page 39).
24