Component video output

[GENERAL q Video Out q Comp. Video]

This setting allows the selection of interlaced (Interlace) or progressive-scan (Progressive) video from the component video outputs.

Progressive-scan video provides a better, clearer picture. However, it is not supported by every television or monitor, and you should ensure that this is supported fully before turning on this option.

<When your TV isn’t compatible with progressive scan, never select “Progressive”. No picture will be shown on the monitor.

In case you select “Progressive” by mistake, connect your TV via the VIDEO OUT jack or S-VIDEO jack to display the Setup menu and change the setting to “Interlace”, or initialize the settings (see page 5).

<When this HDMI output is turned on, even if progressive scan has been selected for the component video outputs, an interlaced signal is output from the COMPONENT VIDEO terminals.

‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.’

PAL-NTSC conversion

[GENERAL q Video Out q PL-NT Conv.]

This allows you to play back and show NTSC discs on PAL equipment, or the other way round. There are three options:

OFF

PAL discs can only be shown on PAL equipment, and NTSC discs can only be shown on NTSC equipment. Use this setting to produce the best possible picture, by playing each type of disc on the appropriate equipment.

PAL>NTSC

PAL discs can be displayed on NTSC equipment. The bottom part of the picture is cut off, and the height is elongated.

NTSC>PAL

NTSC discs can be played back on PAL equipment. The height of the picture is reduced.

Closed captioning

[GENERAL q Video Out q Caption]

The unit can play back DVD discs which include closed captioning information and show the closed captions (on a suitably-equipped television).

Turn this function either ON or OFF.

Still mode

[GENERAL q Video Out q Still Mode]

There are three options to enable different still modes for

 

 

DVD, depending on whether a movie or other type of video is

ENGLISH

being played back. This setting determines the clearest still

 

picture obtained when the DVD playback is paused.

 

Auto

 

Automatically chooses between field and frame modes.

 

 

Field

 

Usually provides a sharp still picture. But depending on the

 

disc, the image might be shaky even when “Field” is selected.

 

Frame

 

Usually provides a better still picture with movie DVDs.

 

41