8
ENGLISH

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance.
To avoid unnecessary service calls, check the hose, dust cup and motor lter
often. Clear a clogged hose, empty the dust cup if it is full, and clean the motor
lter when it is dirty.
CAUTION: Turn off the power switch and unplug the electrical cord before
emptying the dust cup or cleaning the dust cup lter.
CAUTION: Do not use the cleaner without the dust cup lter properly in-
stalled. This can damage the cleaner.
HINT: Some ne particles can restrict airow very quickly and will de-
crease performance even before the dust container appears full.
For that reason, when vacuuming carpet fresheners or cleaners,
powder, plaster dust or similar ne substances, the dust cup and
lter may need cleaning more often.
Dust Cup and Filter
➊ Pull back on the power switch to the “open cup” position and lift dust
cup away from cleaner.
➋ Remove dust cup lter and dump dust cup in a waste container.
The dust cup lter can be cleaned by brushing off over a waste con-
tainer. Do not allow to get wet.
The dust cup can be rinsed under running water and completely dried
before replacing on cleaner. We do not recommend putting it in a
dishwasher.
➌ Replace dust cup lter in dust cup.
➍ Put bottom edge of dust cup in cleaner as shown above and rotate
down against cleaner rmly. Dust cup latch will automatically lock.

➌

➂ Cleaning Accessories (Contd.)
Open
Cup

➊

➋