Maintenance
WARNING
Under normal use the cloth mesh will deteriorate and wear. Objects could exit through worn cloth mesh at high speeds. Thrown objects can cause serious injury or kill you or bystanders.
Check cloth mesh frequently for tears and holes. Replace worn cloth mesh.
Check Exhaust Diverter
Service Interval: Before each use or daily
CAUTION
The exhaust diverter is hot. Touching a hot exhaust diverter can cause severe burns.
Allow the exhaust diverter to cool completely before performing maintenance.
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Inspect and remove debris from the exhaust diverter daily.
Lubricate Grease Fittings
Note: See chart for service intervals.
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Lubricate fittings with NGLI grade #2
Refer to the following chart for fitting locations and lubrication schedule.
Lubrication Chart
| Fitting | Initial | Number of | Service |
| Locations | Pumps | Places | Interval |
1. | Idler | 1 | 25 Hours | |
Bushings |
|
|
| |
2. | Door | 1 | 25 Hours | |
Handle |
|
|
| |
3. | Lift | 1 | Yearly | |
Handle Pivot |
|
|
| |
(LZUVQD11 |
|
|
| |
Only) |
|
|
| |
Check Condition of Belt
Service Interval: Every 50 hours
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Inspect the belt for damage or wear. Replace belt with one of the following:
Deck | Part No. |
48 inch | |
52 inch | |
|
|
60 inch | |
|
|
72 inch | |
|
|
21
