IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 47
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Preset Commands
User presets
Recall preset 1*X2!. 1Rpr X2!] Recall user preset X2!.
Save preset 1*X2!, 1Spr X2!] Save the current picture controls.
Delete preset EX1*X2!PRST}PrstX1*X2!] Clear user preset X2!.
User preset name
Write name E1* X2!,X1$ PNAM}Pnam1*X2!,X1$ ] Set user preset X2! name to X1$.
View name E1*X2!PNAM} X1$ ] View the name of user preset X2!.
NOTE: To clear a user preset name, enter a single space character for X1$. This resets the user preset name
to the default value, “[User Preset XX].” This is valid only for existing presets.
Input presets
Recall preset 2*X2@. 2Rpr X2@] Recall input preset X2@.
Save preset 2*X2@, 2Spr X2@] See the table below for settings
saved on input presets.
Delete preset EX2*X2@PRST}PrstX2*X2@] Clear input preset X2@.
Input preset name
Write name E2* X2@,X1$PNAM}Pnam2* X2@,X1$ ] Set input preset X2@ name to X1$.
View name E2*X2@PNAM} X1$ ] View the name of user preset X2@.
NOTE: To clear an input preset name, enter a single space character for X1$. This resets the input preset name
to the default value, “[Input Preset XXX].” This is valid only for existing presets.
Auto Memories (per input)
Enable EX!*1AMEM}Amem X!*1]Enable Auto Memory on input X!.
Disable EX!*0AMEM}Amem X!*0]Disable Auto Memory on input X!.
Input preset availability
Query input preset
availability
51# X(1X(2...X( 128]
PreIX(1X(2... X(128]
Show the status of all input presets.
Verbose modes 2 and 3
Query user preset
availability
52*X!#X(1X( 2...X(16]
PreUX!*X(1X( 2...X(16]
Show the status of all user presets.
Verbose modes 2 and 3
Saved Settings for User Presets Saved Settings for Input Presets
Color Detail Input Type Contrast V Start Image H/V Position
Tint Preset Name Preset Name Brightness H Active Image H/V Size
Contrast Image H/V Position Audio Gain/Attenuation Detail V Active
Brightness Image H/V Size Color Total Pixels Phase
Tint H Start Film Mode
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X( = Assigned or unassigned 0 = disabled or unassigned
1 = enabled or assigned
X1$ = Text label Up to 16 characters
X2! = User presets 1-16
X2@ = Input presets 1-128