IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 73
Size and Position Page
The Size and Position page provides three methods of adjusting image output size and
position: graphically, numerically, or automatically with Auto-Image. Click the Size and
Position icon on the Global Navigation Bar to open the Size and Position page.
Figure 43. Size and Position Page
To adjust the size and position graphically:
If desired, click the Lock Aspect Ratio check box to constrain proportions.
1. Click and drag the drag points of the sample image to resize the image within the
designated space (defined by the black area in figure 43 above).
2. Click anywhere inside the sample image (see the blue rectangle with a circle inside in
figure 43 above) and drag it anywhere within the designated space to reposition the
image.
To adjust the size and position numerically:
1. Enter a value or click the Up or Down arrow in the Horizontal Size and
Vertical Size fields.
2. Enter a value or click the Up or Down arrow in the Horizontal Position and
Vertical Position fields.
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following (see Auto-Image on
page 20 for more details on Auto-Image settings):
• Click the Auto-Image button to perform a one-time Auto-Image.
• Click the Auto-Image & Fill button to perform a one-time Auto-Image and fill the
entire video output (ignores aspect ratio settings).
• Click the Auto-Image & Follow button to perform a one-time Auto-Image and to
maintain the aspect ratio of the input signal. (ignores aspect ratio settings)