3
1Symbols
V volts
Aamperes
Hz hertz
W watt
alternating current
n0no load speed
Class II Construction
rpm revolutions per minute
spm strokes per minute
2Intended use
The sanders are designed for sanding wood,
plastic, composite materials, paint / varnish,
filling material and similar materials. Metal and
materials with an asbestos content must not
be processed with these tools.
The machine is particularly suitable for
processing smaller surfaces and overhead work
because of its size, its weight and its output.
The machines must not be damp nor operated
in a damp environment for electrical safety
reasons. The machines may only be used for
dry sanding.
The user bears sole responsibility for any da-
mage or accidents resulting from incorrect use.
3Electrical connection and operation
The mains voltage must correspond with the
voltage on the rating plate!
See the following Fig. for connecting or dis-
connecting the power cord of the tool.
Always switch the machine off
before connecting or disconnecting the power
cable!
21 Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tools
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
22 Use only accessories that are
recommen-ded by the manufacturer for
your model. Accessories that may be suitable
for one tool, may become hazardous when used
on another tool.
Service
23 Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified personnel
could result in a risk of injury.
24 When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual. Use
of unauthorised parts or failure to follow
Maintenance instructions may create a risk of
electric shock or injury.
Technical data DS 400 Q DS 400 EQ
Wattage W 200 200
No load speed rpm 13 000 6 000 - 13 000
No. of strokes spm 26 000 12 000 - 26 000
Sanding stroke mm 2.0 2.0
Sanding base (delta form) mm 100 x 150 100 x 150
Weight kg 1.3 1.3
Safety llevel UL 745, CSA C22.2 No. 745
WARNING
Various dust created by power sanding, sawing,
grinding, drilling and other construction
activities contains chemicals known (to the
State of California) to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
-lead from lead-based paints,
-crystalline silica from bricks and cement and
other masonry products, and
-arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies,
depending on how often you do this type of
work.
To reduce your exposure to
these chemicals: work in a
well ventilated area, and
work with approved safety
equipment, such as dust
masks that are specially
designed to filter out micro-
scopic particles.