QuickTips

■Make sure all cable connectors are fully seated on jacks.

■Always match cables according to the colors; RED for right audio, WHITE for left audio and YELLOW for video.

■A solid Blue screen with the word Video displayed means that the Video/Game mode is selected, but no signal is being detected at the Video jack.

■Position your TV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality. However, all Fisher STV model speakers are stray field com- pensated and may be placed next to TV sets without any special precautions.

■DO NOT connect external speakers directly to the TV.

USING THE FRONT AUDIO/ VIDEO

INPUT JACKS (Continued)

CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT

Switch off TV and external equipment before connecting cables.

1.Connect VCR Audio Out (R/L) and Video Out ❶ to the TV Audio Input (R/L) and Video Input ❷.

For Mono VCR (Single Audio Jack) only connect VCR Audio (L) Out to TV Audio (L) Input.

2.Press POWER to turn on the TV. See ❸. Turn on external equipment also.

3.Press the VIDEO MODE key ❹ to select program source: TV signal or signal

from the equipment you have connected to the A/V jacks. See ❹ and page 6 for remote control operation.

 

 

 

 

 

 

A/V JACKS

 

Remote Control

 

RF

IN

R- AUDIO -L

VIDEO

 

 

 

 

CHANNEL

 

 

 

 

 

 

 

 

 

 

 

 

CH3 CH4

OUT

 

 

VIDEO

POWER RESET

 

 

R- AUDIO-L

VIDEO

MODE

 

 

 

 

 

 

TV Front A/V

Back View of

 

❶

1

2

3

Input jacks

VCR

 

 

4

5

6

❸

 

 

 

 

 

 

❹

 

❷

 

 

 

 

 

Camcorder

 

 

 

 

 

 

 

 

 

USING THE AUDIO OUTPUT JACKS

CONNECT A STEREO AMPLIFIER TO AUDIO OUT JACKS

1.Connect the TV Audio Out (R/L) ❶ to the Stereo Amplifier In (R/L) ❷.

2.Press POWER to turn on the TV ❸. Turn on external equipment also.

❶AUDIO UHF/VHF/CATV75ΩOUTPUT

 

L

 

R

❷

Back of TV

 

10

Stereo Amplifier