EN-28
16:9
Image (Video Mode)Aspect
Use this function to choose your desired image size.
Q4 : 3 :Change the original aspect 1:1 to 4:3 at the composite video input
or S-video input.
Q1 TO 1 :Keep the image with original width-height ratio at the component input.
QFILL ALL :The input source will be scaled to fit the projection screen.
QANAMORPHIC : Maintain the original aspect ratio in the center of the output image
and place the majority of the distortion towards the horizontal edges
of the image.
ANAMORPHIC (Video only)
Freeze
QChoose “ON” to freeze the screen image.
QChoose “OFF” to unfreeze the screen image.
1280 X 800
No matter what input signal is, out
put aspect ratio is 16:9 and fit to the
whole screen.