PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET

SPEAKERS

TOP CONTROLS

 

 

AND INDICATORS

PROJECTION LENS ✽

 

 

✽ optional

CAUTION

Do not turn on the projector with the lens cap attached. High temperature from light beam may damage the lens cap and result in fire hazard.

AIR INTAKE

VENT

INFRARED

REMOTE RECEIVER

BACK OF CABINET

POWER CORD

TERMINALS

INFRARED

 

CONNECTOR

AND CONNECTORS

REMOTE RECEIVER

EXHAUST VENT

 

 

 

HOT AIR EXHAUSTED !

Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep the rear grills at least 3.3’ (1 m) away from any object, especially from heat- sensitive objects.

●Do not touch this area, especially screws and metallic parts. This area will become hot when the projector is in use.

This projector detects internal temperature and automatically controls operating power of the cooling fans.

BOTTOM OF CABINET

CARRYING

HANDLE

LAMP COVER

When attaching the PJ-Net Organizer (optional) to the projector, remove the these parts. Refer to the owner's manual of the optional PJ-Net organizer.

AIR INTAKE VENTS

This projector is equipped with cooling fans for protecting from overheating. Pay attention to the following matters to ensure proper ventilation and avoid a possible risk of fire and malfunction.

●Do not cover the vent slots.

●Keep this side clear of any objects. Obstructions may block cooling the air.

ADJUSTABLE FEET

AND

FEET LOCK LATCHES

7