10
•Fit the curved end of the steering column into the hole in
the front axle.
Please Note:You may need to straighten the vehicle
tires and rotate the steering column to fit it into the hole in
the front axle.
•Fit a cap nut onto the end of the steering column.
•While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
•Hold the steering column in place and gently lower the
vehicle body.
•Position the steering wheel so that the spokes form a “Y”
as shown.
•While supporting the steering column, fit the steering
wheel onto the steering column.
•Fit a cap nut onto the end of the steering column.
•Tap the cap nut with a hammer to secure it on the
steering column.
Assembly
Steering Column Hole
Front Axle
Bottom View
5Steering Wheel Cap Nut
•Align the tab on the steering wheel cap with the slot in
the center of the steering wheel.
•Fit the steering wheel cap into the center of the steering
wheel.
•Insert two #8 x 1" screws into the steering wheel cap.
•Tighten the screws with a Phillips screwdriver.Do not
over-tighten.
Steering
Wheel Cap
Steering
Column
Front Axle Cap Nut
Bottom View
687“UP”