Loosen
To tighten the belts:
•Feed the anchored end of the belt up through the buckle to form a loop .
•Pull the free end of the belt .
•Repeat this procedure to tighten the other belt.
To loosen the belts:
•Feed the free end of the belt up through the buckle to form a loop .
Enlarge the loop by pulling on the end of the loop toward the buckle.
•Pull the anchored end of the belt to shorten the free end of the belt .
•Repeat this procedure to loosen the other belt.
Please Note:After adjusting the belts to fit your child, make sure you pull on
them to be sure they are securely fastened.
B
B
Set-Up & Use
Tighten
15
3
Calming Vibrations
•Make sure your child is properly secured in the seat.
•To turn vibrations on,slide the power switch on the electronic unit to the
onposition .
•To turn vibrations off,slide the power switch on the electronic unit to the
offposition O.
IMPORTANT!If vibrations from the electronic unit become faint, or if there
are no vibrations,remove the battery from the small battery compartment
in the electronic unit and dispose of it properly.Replace the battery with a
new “D”(LR20) alkaline batter y.
B
Anchored End
Free End
Anchored End
Free End
B
2