•Locate the electronic unit on the footrest wire.You will see that there are
two battery compartments.The smaller battery compartment powers
the soother;the larger battery compartment powers the toy bar.
•First,loosen the screw in the soother battery compartment door with a
Phillips screwdriver.Remove the battery compartment door.
•Insert one “D”(LR20) alkaline battery,as indicated inside the battery
compartment.
•Replace the battery compartment door.Tighten the screw with a Phillips
screwdriver.Do not over-tighten.
•Next,loosen the screws in the toy bar battery compartment door with a
Phillips screwdriver.
•Insert three “D”(LR20) alkaline batteries,as indicated inside the battery
compartment.
•Replace the battery compartment door.Tighten the screws with a Phillips
screwdriver.Do not over-tighten.
Battery Installation
4
Soother
Battery Compartment
Toy B ar
Battery Compartment