INSTALLATION
Continued
INSTALLING FIREPLACE HOOD | Top View of Rod Layout |
AND SCREEN |
|
1. | Attach hood to firebox using screws pro- | Rear Hole |
| vided (see Figure 19). | |
|
| |
2. | Insert each rod through all rings located | Front |
| at top of screen. | Hole |
3. | Insert first rod into rear hole in left side |
|
| of firebox. Fasten rod to rear hole near |
|
| center of firebox using #10 x 3/8" Phillips |
|
| screw provided (see Figure 20). | Rod |
4. | Insert other rod into front hole on right | Ring |
|
side of firebox and fasten using remaining Phillips screw.
Screen
Identification
Label Location
Hood | Screw |
Figure 20 - Installing Fireplace Screen
(Model May Vary From Illustration)
Screws 
Figure 19 - Screw and Hood Placement
(Model May Vary From Illustration)
Replacement Parts
Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.
If your new product is missing a part or has a broken component, please do not return it to the store. Call FMI PRODUCTS, LLC at
When calling have ready:
•your name
•your address
•model and serial numbers of your heater
•how heater was malfunctioning
•purchase date
Technical Service
You may have further questions about installation, operation, or troubleshooting. If so, contact FMI PRODUCTS, LLC at
When calling please have your model and serial numbers of your heater ready.
You can also visit FMI PRODUCTS, LLC’s web site at www.fmiproducts.com.
16 | www.fmiproducts.com |