OPERATION AND MAINTENANCE
Continued
DAMPER HANDLE OPERATION
Damper handle, which opens and closes damper blade, is located inside firebox at center towards back wall (see Figure 24). Pushing handle back into keyway slot will free damper blade to automatically open. To close, push handle back into keyhole slot then pull down and forward to lock it in place (see Figure 25).
WARNING: Risk of fire! Replace gratewithFMIPRODUCTS, LLC model
Damper
Handle
Figure 24 - Damper Handle Location
Damper
Weight
1 | 2 |
| 3 |
| 3 | 1 | 2 |
To Close Damper | To Open Damper | ||
Figure 25 - Damper Rod
LOCATING ACCESS COVER PLATE
Sheet metal cover plates located underneath front hearth refractory may have shifted or moved out of place while fireplace was in transit. These cover plates must be kept in the proper location prior to using the fireplace (See Figure 26).
For further operating guidelines, instructions and warranty information, please refer to your homeowner's guide or contact your authorized dealer.
Access
Panel
Figure 26 - Locating Access Cover Plate
TECHNICAL SERVICE
You may have further questions about in- stallation, operation, or troubleshooting. If so, contact FMI PRODUCTS, LLC at
You can also visit our web site at www.fmiproducts.com.
REPLACEMENT PARTS
If this product is missing a part or has a broken component, please do not return it to the store. Call FMI PRODUCTS, LLC at
Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.
When calling or writing, please have your model and serial numbers of your fireplace ready.
Model and serial number information are in the fireplace's rating plate located in the screen pocket to the left or right of the face opening.
www.fmiproducts.com | 15 |