Quickstart
30 ProHD DR-HD100 Portable DTE Recorder
JVC GY-HD

The JVC GY-HD control setting is the preferred mode when

using the companion GY-HD100/101 camcorder.

Step 1: Place the GY-HD100/101 into SYNCRO mode from the
camcorder’s 1394 REC TRIGGER menu. Refer to the
camcorder manual for details.
Step 2: Verify that the DR-HD100 is in STOP mode.
Step 3: From the DR-HD100 Home screen, press the Right
navigation button several times until the CONTROL screen
appears:
Step 4: Use the Down navigation button to select JVC GY-HD. The
dash on the left side of an item indicates it is the current
selection. The default value is Local.
Step 5: Press the Select navigation button.
Step 6: The beginning screen returns and a Pause indicator
appears in the upper left-hand corner. Next to this symbol,
is a J indicating that GY-HD100/101 is now controlling the
DR-HD100.
Step 7: Now the DR-HD100 will respond to the camcorder’s
record/record-pause trigger.
Important GY-HD100 Setting
When simultaneously recording to both tape and the DR-HD100, be certain
to set the GY-HD100’s OTHER BACK SPACE [HDV] Menu selection to
P-1394.
With this setting there is a slightly delayed response to the record trigger.
However, when OTHERBACK SPACE[HDV] is set to P-TAPE, the stream
that the DR-HD100 records will contain discontinuities at every point that
recording to tape is initiated. This will result in the loss of content.

CONTROL

LOCAL

-JVC GY-HD

SYNCRO SLAVE

AV / C