SendingWordsBetweenBooks Resetting Your BOOKMAN

This dictionary can send words to and receive words from certain other BOOK- MAN books.

To send a word to another BOOKMAN book that book must be able to send or receive words. To learn if a book can send or receive words, read the User’s Guide.

1. Highlight a word in this book.

To highlight a word in a list, press the arrow keys. To highlight a word in the text, press ENTRAR and then use the arrow keys.

2.Hold ✩ and press CART .

3.Highlight the other book.

4.Press ENTRAR .

The word that you highlighted appears in the other book.

5.If needed, press ENTRAR to look up the word.

If the BOOKMAN keyboard fails to respond, or if its screen performs erratically, first press APAG and then press LI/DE twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addition, resetting your BOOKMAN erases settings and information entered into its built-in book and in any installed book cards.

1. Hold APAG and press LI/DE .

If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of BOOKMAN. Look for it near the book card slot.

➤Troubleshooting

•Make sure your book card, if any, is installed correctly.

•Check that the book card’s metal contacts are free of dirt and dust.

35