OPERATION

To Stop Operation

Press the START/STOP button (Fig. 6 b8).

The OPERATION Indicator Lamp (green) (Fig.3 a5) will go out.

About AUTO CHANGEOVER Operation

AUTO: ● When AUTO CHANGEOVER operation fi rst selected, the fan will operate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.

If the differance between thermostat setting and actual room temperature is more than +4 °F → Cooling or dry operation

If the difference between thermostat setting and actual room temperature is within ±4 °F → Monitor operation

If the difference between thermostat setting and actual room temperature is more than –4 °F → Heating operation

●When the air conditioner has adjusted your room’s temperature to near the thermostat setting, it will begin monitor operation. In the monitor op- eration mode, the fan will operate at low speed. If the room temperature subsequently changes, the air conditioner will once again select the ap- propriate operation (Heating, Cooling) to adjust the temperature to the value set in the thermostat.

(The monitor operation range is ±4 °F relative to the thermostat setting.)

●If the mode automatically selected by the unit is not what you wish, select one of the mode operation (HEAT, COOL, DRY, FAN).

About Mode Operation

Heating: ● Use to warm your room.

●When Heating mode is selected, the air conditioner will operate at very low fan speed for about 3 to 5 minutes, after which it will switch to the se- lected fan setting. This period of time is provided to allow the indoor unit to warm up before begin full operation.

●When the room temperature is very low, frost may form on the outside unit, and its performance may be reduced. In order to remove such frost, the unit will automatically enter the defrost cycle from time to time. During Automatic Defrosting operation, the OPERATION Indicator Lamp (green) (Fig.3 a5) will fl ash, and the heat operation will be interrupted.

●After the start of heating operation, it takes some time before the room gets warmer.

Cooling: ● Use to cool your room.

Dry: ● Use for gently cooling while dehumidifying your room.

●You cannot heat the room during Dry mode.

●During Dry mode, the unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also, the fan may operate at very low speed when adjusting room humidity.

●The fan speed cannot be changed manually when Dry mode has been selected.

Fan: ● Use to circulate the air throughout your room.

During Heating mode:

Set the thermostat to a temperature setting that is higher than the current room tem- perature. The Heating mode will not oper- ate if the thermostat is set lower than the actual room temperature.

During Cooling/Dry mode:

Set the thermostat to a temperature setting that is lower than the current room tem- perature. The Cooling and Dry modes will not operate if the thermostat is set higher than the actual room temperature (in Cool- ing mode, the fan alone will operate).

During Fan mode:

You can not use the unit to heat and cool your room.

En-7

9315345288_OM.indb 7

2/24/2010 1:36:24 PM

Page 7 Page 9
Page 8
Image 8
Friedrich 9315345288 manual En-7, To Stop Operation Press the START/STOP button b8, About Auto Changeover Operation
Page 7 Page 9

9315345288 specifications

Friedrich 9315345288 is a standout model in the realm of portable air conditioning units, designed to provide efficient and effective cooling solutions for residential and commercial spaces. Recognized for its blend of performance, durability, and user-friendly features, this model answers the needs of individuals seeking relief from heat without compromising on convenience.

One of the key characteristics of the Friedrich 9315345288 is its powerful cooling capacity. With a BTU rating typically around 12,000, it can effectively chill spaces up to 550 square feet, making it an excellent choice for medium-sized rooms. The unit operates quietly, which is a crucial factor for users who value peace in their living or working environments. Its noise levels are kept to a minimum due to advanced engineering, making it suitable for bedrooms, offices, or any area requiring a quiet atmosphere.

In terms of energy efficiency, the Friedrich 9315345288 stands out with its high Energy Efficiency Ratio (EER). This feature not only helps in lowering electricity bills but also reflects a commitment to environmentally friendly cooling solutions. Furthermore, it is equipped with a programmable timer and adjustable thermostat, allowing users to customize their cooling schedules to align with their daily routines.

The unit is designed with ease of use in mind, featuring a straightforward digital control panel with remote control access for added convenience. Users can easily manage settings, change modes, and adjust fan speeds at a distance. The Friedrich 9315345288 offers multiple fan speeds and cooling modes, including a dehumidification option that efficiently reduces excess humidity in the air, enhancing indoor comfort.

The construction of the Friedrich 9315345288 is robust, featuring high-quality materials that ensure longevity and reliability. Its portable design includes caster wheels, making it easy to move from room to room as needed. The unit also includes a washable air filter that promotes better air quality and requires minimal maintenance.

Overall, the Friedrich 9315345288 is an excellent investment for anyone looking for a reliable, efficient, and user-friendly air conditioning solution, providing comfort during the hottest months while keeping energy consumption in check.
Top Page Image Contents