Congratulations
Thank you for your decision to purchase Friedrich. Your new Friedrich has been carefully engineered and manufactured to give you many years of dependable,
efcient operation, maintaining a comfortable temperature and humidity level. Many extr a features have been built into you r unit to assure quiet operati on,
the greatest circulation of cool, dry air, and the most econom ic operation.
General Instructions
This Installation and Operation Manual has been designed to insure maximum satisfact ion in the performance of your unit. For years of trouble-free serv ice,
please follow the installation instructions clo sely. We cannot overemphasize the importance of proper i nstallation.
Here are some suggestions to help you use your
new Friedrich most efficiently:
1. Carefully read and follow the installation instructi ons.
2. Make sure the unit is the right capacity for the area being cooled.
An undersized unit makes the uni t work too hard, using m ore
electricity than needed and inc reases wear. An oversized unit
will cycle on and off too rapidly, and the refore cannot control
humidity as well.
3. Clean the lter frequently (See Routine Maintenance, Page 27).
4. Do not block the air ow to and from the unit.
5. A dirty lt er or improperly set controls can af fect th e coolin g
ability of the unit.
6. If cooling is weak and you have ver ied that the lter is clean
WARNING
Read Installation Operation
Manual
Please read this manual thoroughly prior to
equipment installation or operation.
It is the installer’s responsibility to properly
apply and install the equipment. Installation
must be in conformance with the NFPA 70
-2008 National Electric Code or current edition,
International Mechanic Code 2009 or current
edition and any other applicable local or
national codes.
Failure to do so can result in property damage,
personal injury or death.
WARNING
Refrigeration system
under high pressure
Do not puncture, heat, expose to flame or
incinerate.
Only certified refrigeration technicians should
service this equipment.
Only use gauge sets designed for use with
R410A. Do not use standard R22 gauge sets.
R410A systems operate at higher pressures
than R22 equipment. Appropriate safe
service and handling practices must be used.
and the controls are properly set, the unit may need service and
you should call your Friedrich service provider to c heck the unit.
7. Keep blinds, shades and drapes closed on the sunny side of the
room being cooled to reduce radiant heat.
8. Proper insulation helps your unit main tain the desired inside
temperature.
9. Whenever possible, shade south and west facing windows.
10. Keep window coverings away from the unit to provide free air ow.
NOTICE
CAUTION
ANIN
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is a safety Alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol with the word “WARNING”
or “CAUTION”. These words mean:
Indicates a hazard which, if not avoided, can result in severe personal injury or
death and damage to product or other property.
Indicates a hazard which, if not avoided, can result in personal injury and
damage to product or other property.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what will happen if the instructions are not followed.
Indicates property damage can occur if instructions are not followed.
WARNING