21
2
20
Using the viewfinder or LCD monitor, frame your
shot so that the subject fills the entire AF (Auto
Focus) frame.
●
!
If the subject is not in the AF frame, use AF/AE lock
to take the picture (➡P.25).
●
!
In dimly lit scenes where the subject is difficult to see
using the LCD monitor, use the viewfinder to take
the picture.
●
!
Shooting using LCD monitor is recommended when
you want to do accurate adjustment of the range to
be shot.
●
!
When the shot is taken, the date displayed on the
LCD monitor disappears for roughly 3 seconds. The
date cannot be displayed continuously.
6
When you are using the viewfinder to take a
picture at a distance of 0.8 to 1.5 meters (2.6 to
4.8ft), only the shaded area in the figure is
photographed.
4
●
!
The zoom bar display goes off after 3 seconds.
●
!
The lens on the FinePix1400 ZOOM is a 3✕zoom
lens with a focal range equivalent to 38-114mm on a
35mm camera.
Ensure that your fingers or the camera strap do
not obscure the lens, flash, or flash control
sensor.
3
AF Frame
AF Frame
LCD Monitor
Finder
ETAKING PICTURES
To zoom in on the subject (TELEk), press the
“a” side of the “ab” button. To zoom out
(WIDEl), press the “b” side of the “ab”
button. A “zoom bar” is displayed on the LCD
monitor.
The optical zoom operates within this range.
●Flash range
Wide-angle : 0.2m to 3.5m (2.6ft-11.5ft)
Telephoto : 0.8m to 3.5m (7.9in-11.5ft)
●
!
Check that the lens clean. If it is dirty, clean the lens
as described on P.73.
●
!
The image will be blurred if the camera moves when
you take the picture (camera shake).
5