Warning Displayed

Explanation

Remedy

 

• The Memory Card contact area is soiled.

• Wipe the contact area on the Memory Card with a

 

• The Memory Card format is incorrect.

soft, dry cloth. It may be necessary to format the

 

 

Memory Card (➝p.89). If the message still

CARD ERROR

 

appears, replace the Memory Card.

• Camera fault.

• Contact your FUJIFILM dealer.

 

 

• The Memory Card is damaged.

 

 

• Inserted Memory Card is not compatible with your

• Insert a compatible Memory Card that is operation-

 

camera.

checked at FUJIFILM Corporation (➝p.19).

 

 

 

\MEMORY FULL

The internal memory or Memory Card is full.

Erase some images in internal memory or Memory

YMEMORY FULL

 

Card (➝p.38), or use a Memory Card that has ample

 

free space.

 

 

 

 

• The data could not be recorded due to a Memory

• Re-insert the Memory Card or turn the camera off

 

Card error or a connection error between the

and then on again. If the message still appears,

 

Memory Card and camera.

contact your FUJIFILM dealer.

WRITE ERROR

• The image cannot be recorded as it is too large to

• Use a new Memory Card.

 

fit in the available space on the Memory Card.

 

 

• The Memory Card or internal memory is not

• Format the Memory Card or internal memory on

 

formatted.

the camera (➝p.89).

 

 

 

PROTECTED CARD

The SD Memory Card switch is slide to the “Lock”

Unlock the protection by sliding it back (➝p.20).

side.

 

 

 

 

 

 

INTERNAL MEMORY IS

The data could not be recorded or copied since the

Erase some images from the internal memory

FULL

internal memory is full.

(➝p.38), or use a Memory Card that has ample free

 

 

space.

INSERT A NEW CARD

 

 

 

 

 

BUSY

The timing for recording was incorrect because the

Use a Memory Card that was formatted on the

Memory Card was formatted on a PC.

camera.

 

 

 

 

 

The frame number has reached 999-9999.

AInsert a formatted Memory Card into the camera.

 

 

BSet RENEW as the FRAME NO. setting in the

FRAME NO. FULL

 

SET-UP menu (➝p.86).

 

CStart taking pictures (The frame number starts

 

 

from “100-0001”).

 

 

DSet CONT. as the FRAME NO. setting in the

 

 

SET-UP menu.

 

 

 

Appendices

Continued Q 125