Power Supply and Batteries

Notes on Using the Battery Charger

•The battery and battery charger themselves will become warm due to the power stored inside them. This is normal and does not indicate a fault. Wherever possible, use the battery charger in a well-ventilated location.

•There may be vibration noises from inside the battery charger during use. This is normal and does not indicate a fault.

•Do not use the battery charger to charge batteries other than Ni-MH batteries.

•The battery charger could cause interference if placed close to a radio during charging. In this event, move the radio and charger further apart.

•Do not leave the battery charger in the following types of locations:

•Extremely humidity or high temperatures, such as close to a heating appliance or in direct sunlight

•Places with strong vibration

•In very dusty places

•The battery charger accepts input voltages of 100-240 V AC at 50 or 60 Hz and can be used all over the world. However, the shape of the plug and socket-outlet depends on the country of use. Consult your travel agent for details.

ZBattery Charger BC-NH02 Specifications

Rated input

100-240 V AC, 50/60 Hz

Input capacity

100-240 V -0.08 A

Rated output

1.2 V DC, 550 mA × 2

Applicable

AA-size Ni-MH Battery × 2

batteries

 

Charging time

Approx. 5 hours

Dimensions

70 mm × 65 mm × 23.3 mm

 

(2.8 in. × 2.6 in. × 0.9 in.)

 

(L × W × D)

Mass (Weight)

Approx. 60 g (2.1 oz.)

 

(excluding batteries)

Operating

0°C to + 40°C

temperatures

(+ 32°F to + 104°F)

 

 

118