(3) Connecting to a TV with 21-pin SCART Terminal

Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DVD-A1XV’s 21-pin SCART terminal (AV1).

DVD-A1XV

TV

21-pin SCART terminal

NOTE:

•Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause disturbance in the picture.

•Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is PAL formated, set to PAL. (See pages 43, 44.)

•To improve picture quality, you can change the video signal output from the AV1 terminal from “Video” to either “S-Video” or “RGB” to suit the type of television you are using (See page 45.).

(4) Connecting to a AV amplifier with a built-in decoder

When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie theater or concert hall.

AV amplifier with a built-in decoder

DVD-A1XV

(AV control center)

Digital audio input connector

Digital audio input connector

(COAXIAL)

(OPTICAL)

75Ω /ohms pin-plug cable (commercially available)

(or)

Optical fiber cable

(commercially available)

NOTE:

•Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc., that is not DTS-compatible.

2Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)

Dust cap

Line up in proper direction

NOTE:

• Store the dust cap in a safe place, and be careful not to

lose it.

When not using the terminal, attach the cap to protect the

Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.

terminal from dust.

14