When “TV SYSTEM” is selected:
•The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define it.
PROGRESSIVE (Factory default)
The audio signals are synchronized with the progressive output.
(For component video output signals when “COMPONENT VIDEO OUT” at “VIDEO SETUP” is set to “PROGRESSIVE”)
INTERLACED
The audio signals are synchronized with the interlaced output.
(For video output and
HDMI/DVI
The audio signals are synchronized with the video signals output via the HDMI/DVI connectors.
OTHERS
Select this when you want to view both the interlace output/progressive output image and the HDMI/DVI output image at the same time.
The audio signals are set to the optimum timing for the interlace output/progressive output image and the HDMI/DVI output image.
(Note, however, that the audio signals are not synchronized with the
4 interlace output/progressive output image and the HDMI/DVI output image. To synchronize them, set to another position.)
When “SQUEEZE MODE” is selected:
•The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define it.
OFF
Select this to display as full size of a 16:9 TV, regardless of the image’s size.
ON
Select this to display the image with a ratio of 4:3 at the center of a 16:9 TV, regardless of the image’s size.
AUTO
Select this when playing back a 4:3 image, display images with a 4:3 aspect ratio in the center of a 16:9 TV.
When “AUDIO ADJUST” is selected:
•The currently set time is shown on the display.
To change the set time, turn the VIDEO MODE knob, then press the knob. Settable in units of 10 msec between
(+ direction: delay the sounds in the picture.)
The setting is reset to the default value (0 msec) when the “TV SYSTEM” setting at “VIDEO SETUP” is switched.
VIDEO MODE
PUSH ENTER
Main unit
PROGRESSIVE
INTERLACED
HDMI/DVI
OTHERS
OFF
ON
AUTO
TIME: 0msec
TIME: +10msec
65