76 77
ViewingImages
6
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle to turn
the power on.
601
02
USE AT DSC MODE
1Plug the included USB cable into the cradle USB
socket.
2Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.
1
21Turn your PC on.
2Use the USB cable to connect the cradle.
USB socket
3Insert an xD-Picture Card in the camera.
01
02
ON OFF
41Slide the Power switch to the side to turn the
camera on.
2Select “¶” in “USB MODE” in the “SET-UP”
menu (➡P.60).
3Slide the Power switch to the side to turn the
camera off.
01
02
03
5Set the camera into the cradle.
6.2 CONNECTING TO A PC
hWhen the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
h“¶DSC” appears on the LCD monitor.
hPower save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.79 for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.79 for information on the
disconnection procedure.
Camera Operation
Connect the AC power adapter, USB cable or A/V
cable (included) to the camera directly.
◆Connecting the camera without the cradle ◆
socket
DC IN 5V socket
Continued