iLoad a new or fully charged battery.
iPlug the adapter back in.
iLoad the battery in the correct direction.
iClose the battery cover correctly.
Load a new or fully charged battery.
iPut the battery in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
iWipe the battery terminals with a clean,
dry cloth.
iLoad a new or fully charged battery.
iInsert a new xD-Picture Card or erase
some unnecessary frames.
iFormat the xD-Picture Card or internal
memory on the camera.
iWipe the xD-Picture Card contact area
with a clean dry cloth.
iInsert a new xD-Picture Card.
iTurn the camera on.
iLoad a new or fully charged battery.
iWait until the charging is completed before
pressing the shutter button.
iLoad a new or fully charged battery.
iChange the Photography mode.
iSet continuous shooting to “OFF”.
The flash settings are restricted because the
camera settings are tailored to the scene
being shot. Change the Photography mode
for a wider range of flash settings.
iMove to within the effective flash range
before taking the picture.
iHold the camera correctly.
iClean the lens.
iCancel Macro mode.
iSelect Macro mode.
iUse AF/AE lock to take the picture.
This is a characteristic of CCDs and does
not indicate a camera fault.
iAdjust the volume.
iTake care not to block the microphone
during shooting/recording.
iMake sure that the speaker is uncovered.
Unprotect frames using the camera on
which the protection was first applied.
Insert a new xD-Picture Card or erase
some unnecessary frames.
iThe battery has run out.
iThe AC power adapter plug has come out
of the power outlet.
iThe battery is loaded backward.
iThe battery cover is not closed correctly.
The battery has run out.
iCamera is used in extremely cold
conditions.
iThe terminals are soiled.
iThe battery can no longer be recharged.
iThe xD-Picture Card or internal memory
is full.
iThe xD-Picture Card or internal memory
is not formatted.
iThe xD-Picture Card contact area is
soiled.
iThe xD-Picture Cardis damaged.
iThe Auto power off function has turned the
camera off.
iThe battery has run out.
iThe shutter button was pressed while the
flash was charging.
iThe battery has run out.
iPhotography mode is set to “,”, “ÿ” or
“Ù”.
iContinuous shooting is selected.
The Photography mode is set to “AUTO”,
“,”, “.”, “©”, “Ö”, “ÿ”, “Ÿ”, “Ù” or “Õ”.
iThe subject is too far away.
iYour finger was covering the flash.
iThe lens is dirty.
iYou photographed scenery with Macro
mode selected.
iYou took a close-up shot without selecting
Macro mode.
iYou are shooting a subject that is not
suited to autofocusing.
The picture was taken with a slow shutter
speed (long exposure) in a high-temperature
environment.
iThe camera volume is set too low.
iThe microphone was blocked during
shooting/recording.
iThere is something covering the speaker
during playback.
Some frames may be protected.
The internal memory or xD-Picture Cardis
full.
107106
Troubleshooting Possible causes Solutions
Screens are not
displayed in English.
There is no image or
sound on the TV.
The TV image is black
and white.
When connecting the
camera to a PC, the
photographed image or
playback image appears
on the camera’s LCD
monitor.
Nothing happens when
using the Mode switch.
The camera no longer
works correctly.
Cannot print with
PictBridge.
The camera was
connected to a PC
when the USB mode
was set to “®”.
A language other than English is selected in
the “ô” setting in the “˜” SET-
UP menu (➡P.76).
iThe included A/V cable was connected
during movie playback.
iThe camera is not connected to the TV
correctly.
i“TV” is selected as the TV input.
iThe “õ” video output setting is incorrect.
iThe TV volume is turned down.
The “õ” video output setting is incorrect.
iThe USB cable (included) is not correctly
connected to the PC or camera.
iThe PC is not turned on.
iCamera malfunction.
iThe battery has run out.
The camera has suffered an unforeseen
problem.
“®” PICTBRIDGE is not selected in “ò”
USB mode in the “˜” SET-UP menu.
1Press the “MENU/OK” button to display
the menu.
2Press “a” or “b” to select “˜” SET-UP
and press “c”.
3Press “a” or “b” to select “ô”
4Press “c”.
5Press “a” or “b” to select “ENGLISH”.
6Press the “MENU/OK” button.
iAfter the movie playback mode is stopped,
connect the camera and TV correctly.
iConnect the camera and TV correctly.
iSet the TV input to “VIDEO”.
iChange the setting to “NTSC” or “PAL”
(➡P.76).
iAdjust the volume.
Change the setting to “NTSC” or “PAL”
(➡P.76).
iSet up the camera, and connect the USB
cable (included) correctly.
iTurn the PC on.
iBriefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
iLoad a new or fully charged battery.
Briefly remove the battery or disconnect the
AC power adapter. Then reload the battery
or reconnect the AC power adapter and try
again. If you think the camera is faulty,
contact your FUJIFILM dealer.
Select “®” PICTBRIDGE in “ò” USB
mode in the “˜” SET-UP menu.
Perform steps 1to 3to remove the
camera from the PC.
hWindows
1The “New Hardware Found” wizard or
“Scanner and Camera” wizard appears. If
the wizard does not appear, proceed to
step 3.
2Click the [Cancel] button.
3Disconnect the camera from the PC.
hMacintosh
1The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2Click the [Cancel] button.
3Disconnect the camera from the
Macintosh.
Troubleshooting Possible causes Solutions
Troubleshooting eIf you think the camera is faulty, check the following once more.
No power.
Power cuts out during
operation.
Battery runs out quickly.
No photograph is taken
when pressing the
shutter button.
Cannot use the flash.
The flash settings are
restricted and cannot be
selected.
The playback image is
dark even though the
flash was used.
The image is blurred.
There is speckling on
the image.
The camera does not
emit any sound.
Frame erase does not
erase the frame.
The ERASE ALL
function does not erase
all the frames.
The COPY ALL function
does not copy all the
frames.