40 41
AdvancedFeatures
3
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1Set the Mode switch to Photography mode.
Press the “fi(a)” button.
“” appears on the LCD monitor and the subject is
displayed brightly.
To cancel increased brightness:
Press the “fi(a)” button again.
This function is automatically canceled after each
shot.
●
!
When this function is active, it will increase the amount of
speckling in images on the LCD monitor. This is normal and
does not affect the photographed image.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
!
Even if you increase the brightness in low-light conditions,
you cannot check the subject.
●
!
The color tones may vary depending on the subjects.
2
UPUP
1010
NN
NF
N
QUALITYQU A LI T Y
:
AUTOAU T O
STDS T D
:
:
11Set the Mode switch to Photography mode.
2Press the “p” button to display the menu on the
LCD monitor.
1Press “a” or “b” to select “˘” QUALITY.
2Press “c”.
The quality setting is retained even when the
camera is off or the mode setting is changed.
20102
0102
AUTOAU T O
STDS T D
:
:
F
N
N
2816x2112: 10
FRAMESFRA M E S
:
1Press “a” or “b” to change the setting.
2Press the “MENU/OK” button to confirm the
setting.
●
!
The numbers to the right of setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.23).
30102
˘QUALITY MODE (NUMBER OF RECORDED PIXELS)
pPHOTO MODE PHOTOGRAPHY
Continued
fi
INCREASING MONITOR BRIGHTNESS
PHOTOGRAPHY FUNCTIONS
Available Photography modes:
Band ?